I almost installed a Pioneer H/U into my car, but I haven't been able to find the parking brake switch or wire. On my H/U harness there is a light green wire that is labeled parking brake. I removed the center console and see a red and black wire connected to the parking brake going under the carpet toward the dash. Any help would be greatly appreciated.
1
2 replies to this topic
#2
-
- Members
-
- 881 posts
Senior Member
- Gender:Male
- Location:Sacramento, Ca
- 2006
- Toyota
-
Matrix Xr
Posted 11 June 2012 - 05:09 PM
what kind of head unit are you installing? as far as i know the only reason why they have the parking brake wire is to keep you from playing video while driving.
Just ground it.
Just ground it.
Edited by danimal86, 11 June 2012 - 05:09 PM.
Installed: DDM 4500K 55w HID's Morimoto Mini H1 Bi-xenon Projectors (XB-35 Bulbs & Denso Ballasts),(E-Bay) SRI Injen CAI, Pioneer Avh-P3200DVD (With add-on bluetooth & Navi) Avic-X940 Bt, Infinity Components (front) RF Prime 6.5 (rear), DC Header, JL 500/1 and 10w6, TRD Axle Back Exhaust, Camcom, TRD STB, Progress RSB, Scion TC Wheels Stock 16" 5-Spoke, Scanguage II, VLED V3 Triton Brake Lights, VLED: Interior reverse and flashers,
Next:Fx-R 3.0 retrofit LS460 Retrofit, Rear Disc Conversion
Next:
#3
-
- Members
-
- 7,367 posts
a bit of a troll
- Location:Near the GTA but no in it
- Interests:My Car and a few other things
- 2003
- Toyota
-
Matrix XR
Posted 03 August 2012 - 03:29 PM
I'm a little late to the game here but danimal86 is correct, but the parking break switch is under the center console at the base of the parking break lever.
Vin
Vin
