Edited by neofx19, 04 March 2012 - 01:48 PM.
Magnaflow 14210 Muffler On Matrix 1.8l
Started by neofx19, Mar 04 2012 01:47 PM
12 replies to this topic
#1
Posted 04 March 2012 - 01:47 PM
Here is a short video of a magnaflow 14210 muffler installed on a 2010 matrix 1.8 w/K&N intake. Its a pretty good fit, its smaller than OEM but much louder. I didn't rev the engine too hard, so you won't hear it booming off. If anybody here is thinking of getting a muffler try this one.
#2
Posted 04 March 2012 - 01:58 PM
Its got a nice grunt to it at idle, should get some WOT video's also.
2003 Toyota Matrix XR-T
Project "2.0L": Updates
Pictures of Project 2.0L
Video's of Matrix
Ex-DSM Member #2
Project "2.0L": Updates
Pictures of Project 2.0L
Video's of Matrix
Ex-DSM Member #2
#3
Posted 04 March 2012 - 07:33 PM
*sigh* i wish it sounds that good when you're standing like 10 feet away. you can barely hear it past 5 feet!
#5
#6
Posted 05 March 2012 - 01:22 AM
jc0522, on 05 March 2012 - 12:24 AM, said:
Hahaha yea K&N and magnaflow FTW! My magnaflow is kind of loud. Maybe its due to the cold weather up north but man when I start the engine I can REALLY hear the muffler now. Before it was sooo silent. And when I drive the car I have to increase the volume in my stereo in the car a bit more because the muffler is loud. I don't know, it could be just me, I don't really roll with my buddies and there modified cars so I can't tell how loud it is compared to theres. I can tell you this though there is a lot more cabin noise from the muffler now.
Edited by neofx19, 05 March 2012 - 01:28 AM.
#7
Posted 26 March 2012 - 10:12 AM
what else did you need besides the muffler?
#8
Posted 27 March 2012 - 01:19 AM
Adrian_3, on 26 March 2012 - 10:12 AM, said:
what else did you need besides the muffler?
some people also get a tip just so it looks better instead of having just a pipe stick out. all the other piping should be provided by your mech who will be welding your muffler together.
#10
Posted 27 March 2012 - 07:06 AM
so what kind of borla will fit on a 1.8?
#11
Posted 27 March 2012 - 07:09 AM
jc0522 could you take a pic of your muffler showing where the piping goes? im wondering bcoz i think theres 3 outlet on the 14210?
#12
Posted 27 March 2012 - 11:20 AM
Adrian_3, on 27 March 2012 - 07:09 AM, said:
jc0522 could you take a pic of your muffler showing where the piping goes? im wondering bcoz i think theres 3 outlet on the 14210?
pretty sure there's only 2 outlets... the inflow and out flow.

he's welding one outlet, then you can see the other outlet.
#13
Posted 30 March 2012 - 03:52 AM
any drive-by vids?












