1
10 replies to this topic
#1
-
- Members
-
- 105 posts
Senior Member
Posted 26 February 2012 - 04:13 AM
Installed this ebay catch can 8000km ago. Put steel wool inside and fabricated a down pipe for the inlet tube inside. 8000km later, check out all the blow-by...only after 8k!!
K&N INTAKE
CUSTOM OIL CATCH CAN
TRD FRONT STRUT BRACE
TRD REAR SWAY BAR
ULTRA RACING 16MM REAR SWAY BAR
EIBACH PROKIT SPRINGS
XXR 522 - 18X8.5 / FALKEN ZIEX 612 - 225/40/18
#2
-
- Members
-
- 2,521 posts
Guru
- Gender:Male
- Location:Atlanta, GA
- Interests:Climbing, Cycling, Trail Running, Art, Music, Movies, Beer, Video Games, and Cars.
- 2010
- Mazda
-
3S Sport
Posted 26 February 2012 - 08:31 AM
Cool...
#3
-
- Members
-
- 282 posts
Senior Member
- Gender:Male
- Location:Toronto Ontario
- 2005
- Matrix
Posted 26 February 2012 - 12:17 PM
mostly city or highway driving?
#4
-
- Members
-
- 105 posts
Senior Member
Posted 26 February 2012 - 03:38 PM
About 50/50. 8km city 8km hwy everyday..
K&N INTAKE
CUSTOM OIL CATCH CAN
TRD FRONT STRUT BRACE
TRD REAR SWAY BAR
ULTRA RACING 16MM REAR SWAY BAR
EIBACH PROKIT SPRINGS
XXR 522 - 18X8.5 / FALKEN ZIEX 612 - 225/40/18
#5
-
- Members
-
- 1,940 posts
Guru
- Gender:Male
- Location:Rhode island
- 2004
- Toyota
-
Matrix XR
Posted 26 February 2012 - 08:22 PM
link to the catch can? that one looks good, it blends in perfectly.
#6
-
- Members
-
- 1,325 posts
Guru
- Gender:Male
- Location:Clifton
- Interests:Hockey, soccer, snowboarding, and some car stuff here and there. Oh and craft beer.
- 2006
- Toyota
-
Matrix XR AWD
Posted 26 February 2012 - 10:14 PM
Yea I've been looking for a good oil catch can and that one fits my requirements.
Current Mods
Custom magnaflow exhaust, TRD front upper strut bar, H1 UR Retrofitted Projectors with Apollo shrouds 5K, 6K HID Fogs, Cupholder LED's, Underseat LED bars, 5% tints in rear windows, 17"x7.5 Ikon rims and Canuck lowering springs w/ stock struts.
Custom magnaflow exhaust, TRD front upper strut bar, H1 UR Retrofitted Projectors with Apollo shrouds 5K, 6K HID Fogs, Cupholder LED's, Underseat LED bars, 5% tints in rear windows, 17"x7.5 Ikon rims and Canuck lowering springs w/ stock struts.
#7
-
- Members
-
- 105 posts
Senior Member
Posted 26 February 2012 - 11:04 PM
It was one of these,
http://www.ebay.com/...#ht_2267wt_1054
I just stripped the cheesy paint off, scuffed it, then painted it with a couple of coats of hi-temp tremclad black. Then replaced the barbs with standard 3/8 brass fittings from home depot.
Then I fabricated my down tube and sealed the barbs off with some JB weld.
I also had to make my own mount to fit in such a tight space. It's mounted on the lower bolt of the heat shield.
http://www.ebay.com/...#ht_2267wt_1054
I just stripped the cheesy paint off, scuffed it, then painted it with a couple of coats of hi-temp tremclad black. Then replaced the barbs with standard 3/8 brass fittings from home depot.
Then I fabricated my down tube and sealed the barbs off with some JB weld.
I also had to make my own mount to fit in such a tight space. It's mounted on the lower bolt of the heat shield.
K&N INTAKE
CUSTOM OIL CATCH CAN
TRD FRONT STRUT BRACE
TRD REAR SWAY BAR
ULTRA RACING 16MM REAR SWAY BAR
EIBACH PROKIT SPRINGS
XXR 522 - 18X8.5 / FALKEN ZIEX 612 - 225/40/18
#8
-
- Members
-
- 1,940 posts
Guru
- Gender:Male
- Location:Rhode island
- 2004
- Toyota
-
Matrix XR
Posted 27 February 2012 - 12:12 AM
great , thanks 
#9
-
- Members
-
- 1,325 posts
Guru
- Gender:Male
- Location:Clifton
- Interests:Hockey, soccer, snowboarding, and some car stuff here and there. Oh and craft beer.
- 2006
- Toyota
-
Matrix XR AWD
Posted 27 February 2012 - 07:25 PM
Are those drain hole son the bottom? What could I use to plug those holes?
Current Mods
Custom magnaflow exhaust, TRD front upper strut bar, H1 UR Retrofitted Projectors with Apollo shrouds 5K, 6K HID Fogs, Cupholder LED's, Underseat LED bars, 5% tints in rear windows, 17"x7.5 Ikon rims and Canuck lowering springs w/ stock struts.
Custom magnaflow exhaust, TRD front upper strut bar, H1 UR Retrofitted Projectors with Apollo shrouds 5K, 6K HID Fogs, Cupholder LED's, Underseat LED bars, 5% tints in rear windows, 17"x7.5 Ikon rims and Canuck lowering springs w/ stock struts.
#10
-
- Members
-
- 105 posts
Senior Member
Posted 27 February 2012 - 09:17 PM
There's only one hole to drain from on the side. The rest of the holes are for the fluid level sight. I ended up buying a bolt to replace the one that came with the can. I just picked it up from home depot.
K&N INTAKE
CUSTOM OIL CATCH CAN
TRD FRONT STRUT BRACE
TRD REAR SWAY BAR
ULTRA RACING 16MM REAR SWAY BAR
EIBACH PROKIT SPRINGS
XXR 522 - 18X8.5 / FALKEN ZIEX 612 - 225/40/18
#11
-
- Members
-
- 1,325 posts
Guru
- Gender:Male
- Location:Clifton
- Interests:Hockey, soccer, snowboarding, and some car stuff here and there. Oh and craft beer.
- 2006
- Toyota
-
Matrix XR AWD
Posted 27 February 2012 - 10:46 PM
Thank you. Cab;t wait til it gets here so I can install it.
Current Mods
Custom magnaflow exhaust, TRD front upper strut bar, H1 UR Retrofitted Projectors with Apollo shrouds 5K, 6K HID Fogs, Cupholder LED's, Underseat LED bars, 5% tints in rear windows, 17"x7.5 Ikon rims and Canuck lowering springs w/ stock struts.
Custom magnaflow exhaust, TRD front upper strut bar, H1 UR Retrofitted Projectors with Apollo shrouds 5K, 6K HID Fogs, Cupholder LED's, Underseat LED bars, 5% tints in rear windows, 17"x7.5 Ikon rims and Canuck lowering springs w/ stock struts.
